Sintered stainless steel filter cartridge


  • High mechanical strength
  • Resistant to high temperatures
  • Excellent chemical resistance
  • Self-supporting construction
  • Cleanable
  • No migration of media
  • Filtration direction of both sides (in-to-out or out-to-in)
  • Thirteen end cap configurations available
  • Five different construction materials available
  • Suitable for both liquid and gas filtration
  • 1935/2004/CE certification available upon request
  • Filtration fineness from 0.5 to 60 μm

DIFFERENTIAL PRESSURE
Filter cartridge replacement or cleaning: 2.0 bar at 25 °C
Max. allowable: 6.0 bar (out-to-in) – 16 bar (in-to-out)

WORKING TEMPERATURE
400 °C (316L SS)
600 °C (Inconel)
450 °C (Hastelloy C276)
250 °C (Bronze)

CONSTRUCTION MATERIALS
Filter media: 316L SS – Inconel – Hastelloy C276 – Titanium – Monel 400 – bronze
Seals: Buna-n – EPDM – Viton – silicone – FEP – PTFE (DOE only) – KlingerSil

DIMENSIONS
Outer diameter: 50, 60 (std.), 64 (Bronze), 80 mm
Length: 5″ to 70″

FILTER SURFACE
OD 50 mm: 0.039 m2 x 10″
OD 60 mm: 0.050 m2 x 10″
OD 80 mm: 0.063 m2 x 10″

MAIN APPLICATIONS:

  • Chemistry
  • Petrochemical
  • Oil & gas
  • Food and drink
  • Energy generation
  • Dyeing and waxing
  • Pharmaceutical
  • Microelectronics
  • General industry

EFFICIENCY / DEBIET / Delta-P data:

Tabel delta P voor gesinterde filterkaars

Flow rate liquid (m3/h) – Flow rate air (Nm3/h @ 7 barg) – Flow rate steam (kg/h) – Clean Delta-P 0.1 bar
For gases other than air: DP = 0.1 x gas viscosity (cP) / 0.018 cP (air).
Flow rate valid for clean water and air, reduce flow rate depending on application.

LIQUID TEMPERATURE LIMITATION

Beperkingen van de temperatuur bij gebruik van gesinterde filterkaars

TEMPERATURE LIMITATION OF SEALS

welke temperatuur kunnen de dichtingen aan van gesinterede filterkaars

The operating temperature is limited by the installed seals.

Category: