Stainless steel filter cartridge with sintered fibers


  • High mechanical strength
  • Resistant to high temperatures
  • Excellent chemical resistance
  • Pleated construction
  • Cleanable
  • Dirt holding capacity three times higher than conventional metal cartridges
  • Porosity and permeability twice as high as sintered powder cartridges
  • Flow rate four times higher than conventional metal filter cartridges
  • No migration of media
  • 1935/2004/CE certification available upon request
  • Filtration direction from outside to inside
  • Twelve end cap configurations available
  • Four different construction materials available
  • Two assembly technologies available
  • Special design for filtration of molten polymers available
  • Suitable for both liquid and gas filtration
  • Absolute filtration from 1 to 75 μm

DIFFERENTIAL PRESSURE
Filter cartridge replacement or cleaning: 2.0 bar at 25 °C
Max. allowable: 8 bar @ 25 °C (crimped) – 15 bar @ 25 °C (welded) – 103 bar @ 25 °C (polymers)

WORKING TEMPERATURE
360 °C – 316L SS
560 °C – Inconel®
600 °C – Hastelloy®

CONSTRUCTION MATERIALS
Filter media – hardware: 316L SS (type G, H & P) – 304 SS (type H & P) – Inconel® (type H & P) – Hastelloy® (type H & P)
Seals: Buna-n – EPDM – Viton – Silicone – FEP – PTFE (only DOE) – KlingerSil (only DOE)

DIMENSIONS
Outside diameter: 60 mm pressed – 68 mm Welded
Inner diameter: 1.0″ (26 mm) – 1.4″ (36 mm) (cod. 9 only)
Length: 10″, 20″, 30″, 40″

FILTER SURFACE
10″ 0.13 m2
20″ 0.26 m2
30″ 0.39 m2
40″ 0.52 m2

OPTIONS
Outer protection spring – Food grade 1935/2004/CE

MAIN APPLICATIONS:

  • Chemistry
  • Petrochemical
  • Fused polymers
  • Oil & gas
  • Food and drink
  • Hydraulic applications
  • Pharmaceutical
  • Microelectronics
  • General industry

CORROSION RESISTANCE:

– 316L SS Not suitable with Cl- Br- F-
– Inconel Not suitable with HCl, HF, H2SO4
– Hastelloy Suitable for HCl, HF, H2SO4

Corrosieweerstand gesinterde filterkaars

EFFICIENCY / DEBIET / Delta-P data:

Verschildruk tabel gesinderde filterkaars vezels

Flow rate liquid (m3/h) – Flow rate air (Am3/h) – Flow rate steam (kg/h) – Clean Delta-P 0.05 bar
For gases other than air: DP = 0.05 x gas viscosity (cP) / 0.018 cP (air)

FILTRATION EFFICIENCY

Filtratie efficiëntie tabel

TEMPERATURE LIMITATION OF SEALS

Welke temperaturen kunnen de dichtingen aan van een gesinterde filterkaars

The operating temperature is limited by the installed seals.

Category: