Melt-blown PP filter cartridges for high flow rates


  • Very high flow rates
  • 100% pure polypropylene.
  • Excellent chemical stability.
  • Surface, binder and adhesive-free construction.
  • Lower disposable cost (compressible due to coreless construction)
  • High dirt load capacity and extended service life.
  • Filter matrix with graduated density.
  • Very stable pore size.
  • Media with very high empty volume.
  • No fiber releasing.
  • Available in 2 sizes and 2 lengths
  • Up to 7 removal ratings available

 

  • Filter finenesses: 1, 5, 10, 20, 50, 75, 100 μm (other filter finenesses on request)
  • Maximum working pressure: 4 bar @ 20 °C
  • Max. constant temperature: 40 °C
  • Construction Materials: (Materials certified by NSF42 and FDA CFR Title 21)
    • filter media and end caps: polypropylene
    • End-seam: thermally glued
    • Seals: Buna-n, EPDM, Silicone, Viton
  • Dimensions – MHL Series:
    • length: 508 – 1016 mm
    • outside diameter: 152.4 mm
    • diameter inside: 114.3 mm
  • Dimensions – MHF Series:
    • length: 508 – 1016 mm
    • outside diameter: 110 mm
    • diameter inside: 80 mm

OVERALL OPERATION

The HY-FLOW series filter cartridges are designed for deep filtration at large flow rates.
The progressive build-up structure of the media is designed with low fiber density at the filter surface with progressively higher density toward the center. The filter cartridges have a special design with larger inner diameter with more surface area which reduces the differential pressure and makes it possible to use a smaller amount of filter elements in high flow rate applications.
Consequently, the filter housing will also be smaller and the overall investment cost will be lower.
HY-FLOW series filter elements are manufactured with coreless design so they are compressible and provide lower disposable costs. HY-FLOW series filter elements are mounted on a specific permanent 316L SS perforated core to increase differential pressure resistance and facilitate maintenance.

MHL SERIES

MHL filyerkaars - grafiek drukverschil per debiet

Water flow [m³/h]

MHF SERIES

MHL filterkaars - grafiek drukverschil per debiet

Water flow [m³/h]

Flow rate for 40″ length element. For 20″ element multiply DP by 2. For liquids other than water, multiply DP by the viscosity of the liquid in cP.

APPLICATIONS

demi water, process water, deionized water, R.O. membrane protection, seawater, wastewater.
Amine, gasoline, lubricating oils, glycol, additives, process fluids.
Resins, varnishes, organic and inorganic acids, inks, coatings, magnetic coating, photo emulsion, latex.
Edible oils, wine, beer (resin trap), fruit juices, syrups, vinegar, soft drinks.

Category: