Absolute filter – broad spectrum – 0.6 to 80 microns


  • Suitable for food industry and sterilization
  • Large filter area
  • High flow rates
  • High dirt holding capacity
  • resistant to the discharge of contaminants even at high delta-P
  • Filtration direction from outside to inside
  • Available with six different types of end caps
  • Four different filter media available
  • Filter support made of pure polypropylene
  • Broad chemical compatibility
  • Suitable for filtration of air and fluids
  • Fusion bonding assembly
  • FDA approved materials (for full polypropylene model only)
  • 1935/2004/CE certification available upon request (PP version only)
  • Absolute filtration from 0.6 to 80 μm

  • Max. working temperature: 80 °C (polypropylene core) – 95 °C (stainless steel core)
  • Sterilization / disinfection:
    • 125 °C for 30′ in autoclave without Delta-P
    • In hot water at 80 °C for 60′ in line
  • Differential pressure:
    • Filter cartridge replacement: 2.0 bar @ 25 °C
    • Max. allowable: 5.0 bar @ 25 °C
  • Construction material:
    • Filter media: polypropylene , fiberglass, polyester, Stainless steel mesh
    • Filter support and hardware: polypropylene
    • Seals: Buna-M, EPDM, Viton, Silicone, FEP, PTFE (DOE only)
  • Dimensions: External diameter: 2.7″ (68 mm) – internal diameter: 1.1″ (28 mm), 1.4″ (36 mm) (cod. 9L only) – length: 10″, 20″, 30″, 40″, 50″, 60″
  • Filter area x 10″:
    • Polypropylene core: 0.6 ÷ 5 μm: 0.5 m2, 10 ÷ 80 μm: 0.6 m2
    • Core of stainless steel: 0.6 ÷ 5 μm: 0.57 m2, 10 ÷ 80 μm: 0.68 m2

FLOW / DELTA-P DATA – DHC

Delta-P tabel voor absolute filterkaars

Flow rate liquids (m3/h) – Flow rate air (Am3/h) – Clean Delta-P 0.1 bar. Flow rate valid for 10″ long cartridges.
For gases other than air: DP = 0.1 x gas viscosity (cP) / 0.018 cP (air).
Flow rate valid for clean water and air, reduce flow rate depending on application.

FILTRATION EFFICIENCY / AVAILABLE FILTARTY FINENESS

tabel filtratie effeciëntie absolute filterkaars

Filtration efficiency of liquids defined with Multipass ISO 4572 test

Filtratie efficiëntie absolute filterkaarsen

APPLICATIONS

Desalination – water treatment – fine chemicals – petrochemical – oil & gas – food and beverage – power generation – paints and resins – pharmaceutical – microelectronic – galvanic – steel mill – general industry

Category: