Absolute filtration 0,6 to 80 micron


  • Large filter area
  • High flow rates
  • High dirt holding capacity
  • resistant to the discharge of contaminants even at high delta-P
  • Filtration direction from outside to inside
  • Available with six different types of end caps
  • Three different filter media available
  • Two different diameters available
  • Filter support made of pure polypropylene
  • Broad chemical compatibility
  • Suitable for filtration of air and liquids
  • Fusion bonding assembly
  • FDA approved materials (for full polypropylene model only)
  • Absolute filtration from 0.6 to 80 μm
  • Can serve as an alternative to depth filtration filter cartridges due to the large filtration surface area

  • Max. working temperature: 80 °C (polypropylene core) – 95 °C (stainless steel core)
  • Differential pressure:
    • Filter cartridge replacement: 2.0 bar @ 25 °C
    • Max. allowable: 4.5 bar @ 20 °C, 2.8 bar @ 60 °C, 1.4 bar @ 80 °C
  • Construction material:
    • Filter media: polypropylene , fiberglass, polyester
    • Filter support and hardware: polypropylene
    • Seals: Buna-M, EPDM, Viton, Silicone
  • Dimensions: External diameter: 2.7″ (68 mm) or 2.52″ (64 mm) – Internal diameter: 1.1″ (28 mm) – Length: 10″, 20″, 30″, 40″, 50″, 60″
  • Filter area x 10″:
    • OD 2.7″: Polypropylene core 0.5 sq. ft. – Stainless steel core 0.55 sq. ft.
    • OD 2.52″: Polypropylene core 0.5 sq. ft. – Stainless steel core 0.55 sq. ft.

FLOW / DELTA-P DATA – DHC

tabel waarden delta-P per debiet absolute filterkaars geplisseerd

Flow rate liquid (m³/h) – Flow rate air (Nm3/h @ 7 barg) – Pure Delta-P 0.1 bar
For gas other than air DP = 0.1 (bar) x gas viscosity (cP) / 0.018 cP (air)

FILTRATION EFFICIENCY

Filtratie efficiëntie van de absolute filterkaars

Filtration efficiency of liquids defined with Multipass ISO 4572 test

APPLICATIONS

Desalination – water treatment – fine chemicals – petrochemical – oil & gas – power generation – general industry

Category: