,

100 series – Scannercleaning


  • Compact, lightweight modular filters
  • Setup without external power source is possible, with unique water control system
  • Continuous supply of filtered water during backflush
  • Easy to install, operate and maintain
  • Interchangeable parts (between models)
  • Available controls: electronic, hydraulic, smart-control

 

The ideal waterfiltration solution for a wide range of applications.
Waterflow up to 1000 m³/h per filterunit

  • Flow rates: M100: up to 400m³/h (1,760 gpm) – MG: up to 800m³/h (3,520 gpm)
  • Water for cleaning: less than 1% of the total flow
  • Filtration degrees: 500 – 80 micron

How it works

 

GENERAL

The M100 and MG series are automatic self-cleaning filters, ideal for remote installation locations. They are equipped with a water-driven self-cleaning mechanism that doesn’t require an external power source for operation. If necessary, an electronic control can also be used. With a variety of screen areas the M100 and MG models support flow rates of up to 3,520 gpm (800 m3/h), with filtration degrees of 500 down to 80 micron and inlet/outlet diameters from 2” to 14”.

 

THE FILTRATION PROCESS

The filtration process begins when untreated water flows through the filter inlet. The coarse screen pre-filters the water to protect the cleaning mechanism from large debris. The water then passes through the inner surface of the fine screen where dirt particles are trapped and accumulate inside the filter, while clean water flows through the filter outlet. The gradual accumulation of dirt on the inner sieve surface creates a filter cake which increases the pressure differential across the sieve.

 

THE SELF-CLEANING PROCESS

When the pressure differential across the filter screen reaches a preset level of 0.5 bar (7 psi), the M100 or MG filter starts the self-cleaning process by opening the internal flush valve. This results in the release of a back-flush stream flowing through the nozzles out of the hollow suction-scanner shaft to the turbine and to the drainage pipe.

Dim: mm (inch)

Pressure Loss Graph – in clean water

Dim: mm (inch)

Pressure Loss Graph – in clean water

Dim: mm (inch)

Pressure Loss Graph – in clean water

Dim: mm (inch)

Pressure Loss Graph – in clean water

Dim: mm (inch)

Pressure Loss Graph – in clean water

Our Partner

Specifications M100 - MG

Technical specifications M100 series

Technical specifications MG series