SMP series

UV equipment - medium pressure

 
Technical specifications
UV-C dose (*) > 800 J/m² (5.000 h)
Manifold material AISI 316L stainless steel
Cleaning system manually activated rack cleaning system
Max. pressure 9 bar
Samples taken at outlet
Dimensional sketches see below

(*)Data valid for : 99% - 1 cm transmitanceafter 5.000 hours

 

Due to the higher output from the lamps, the medium pressure units are able to treat large water flow-rates, while remaining compact in size. When suitably sized for its germicidal action, UV-C also provides a photochemical degradation effect. The efficiency of the medium pressure equipment is guaranteed with few lamps being used, and it is used for applications in which large volumes of water also have to be treated (e.g. water supplies, post-disinfection of waste water, etc.).
In addition, they are particularly suitable for swimming pool applications, since they reduce the high combined chlorine concentration, which is the major cause of irritation and unpleasant odours. In the swimming field the management
analysis on the
medium pressure systems have remarked a very good relationship cost/beneficts, referable to the general improvement of the quality of swimming water and to obtaining of very short amortization times of the purchase cost.

 

Optionals of SMP series


Telecontrol system with telephonic controller
Remote shutdown system (24V)
Shutdown system by flowmeter
Automatic cleaning system
Equipment for higher flow-rates

 

SMP series
UV SMP 10
UV SMP 20
UV SMP 25
UV SMP 35
UV SMP 50
UV SMP 70
UV SMP 105
UV SMP 140
Max. flow rate (m³/h)
40
90
130
250
350
500
750
1200
N° of lamps
1
1
1
1
2
2
3
4
Standard in/out (PN10)
DN 80
DN 100
DN 150
DN 200
DN 200
DN 250
DN 300
DN 400
Electrical panel dimensions (mm)
700x400x300
700x400x300
700x400x300
700x400x300
700x400x300
1300x800x400
1300x800x400
1700x800x400
 
RACK ELECTRICAL PANEL
   
Control of the general working by programmable micro-processor
Plant working hour-meter
Resettable lamp working hour-meter
Check that lamps are working properly
Monitoring the temperature inside the electrical panel
Programmable multi-function display
Memory blocking of identity number of any faulty lamp
NA/NC free contact - 220 V NA/NC outlet - 5A max
RS port for pc connection
General trip switch
Electrical supply 230-240V, 50-60 Hz
Visual alarm for faults
Monitoring of temperature and irradation, with pre-set alarm tresholds

Automatic switching off of the system for high temperature of the panel / UV chamber

ON REQUEST :
4-20 mA outlet
Ö-Norm / DVGW approved sensor
 
Dimensional sketches
 
 
 
   

 
Filtermat filters your reliable partner
 

Filtermat filters
Telephone +32-3-711.03.57 or +32-3-710.65.50
Fax +32-3-711.03.58 or +32-3-710.65.58
Address Winninglaan 17, B-9140 Temse (Belgium)
Email info@filtermat.be
Website www.filtermat.be