Filtering cells "CS" type

 

G4
They are strong filtering cells at medium efficiency, composed of a self extinguishing (F1 class according to DIN 53438) synthetic filtering media, kept by two zinc-plated wire nets (mesh 12x12 mm) and boxed into a 7/1O mm galvanized steel frame.
   
APPLICATIONS They are used for fan-coil, air treatment units, warm air generators, ventilation equipment of machines and as prefilters.
FEATURES The filtration classes of these filters, according to EN 779 standards, are G4 for filters with 23 and 48 mm thickness and G3 for filters having 12 mm thickness. See the table below.
INSTALLATION & SERVICE The CS filters can be installed into C-shaped guides or into holding frames at frontal access. Replace or regenerate the cells once having reached a resistance of 200 Pa. Clean by shaking (in case of rough and dry dust) or by counter current air or by warm water and cleaning agent.
 
The table below shows the capacity and the initial resistance for the standard sizes.
 
Dimensions (mm)
-
Capacity (m³/h)
Initial resistance (Pa)
-
Capacity (m³/h)
Initial resistance (Pa)
thick 23 mm
thick 48 mm
thick 23 mm
thick 48 mm
400 x 500
630
25
40
950
40
70
400 x 625
800
1200
500 x 500
800
1200
500 x 625
1010
1520
595 x 595
1140
1710
287 x 595
520
780
 
The filters with 12 mm thickness have 35 Pa resistance at 1,5 m/s air velocity. The limit working temperature is of approx. 90°C.
The CS filtering cells can be supplied with different dimensions and thickness from the standard ones above and with mattresses having different composition (glass fibers, polyurethane foam, etc.) and/or performances.

Telephone +32-3-711.03.57 or +32-3-710.65.50
Fax +32-3-711.03.58 or +32-3-710.65.58
Address Winninglaan 17, B-9140 Temse (Belgium)
Email info@filtermat.be
Website www.filtermat.be