 |
 |
 |
|
|
|
|
Filtering cells "CM" type
|
 |
G2 |
| They are strong filtering cells at medium efficiency, composed of a labyrinth structure filtering mattress having several knitted aluminum flat wire layers, kept by two zinc-plated wire nets (mesh 12x12 mm) and boxed into a 7/1O galvanized steel frame. | ||
| APPLICATIONS | They are used for fan-coil, air treatment units, warm air generators, ventilation equipment of machines, as prefilters to filters with higher performances, as filters for hoods and drops separators. |
| FEATURES | According to EN 779 Standards, the filtration class of these filters is G2. It is possible to get different filtering characteristics by changing the number of metallic layers composing the media and/or moistening the filters by adhesive oils. See the table below. |
| INSTALLATION & SERVICE | The CM filters can be installed into C-shaped guides or into holding frames at frontal access. Replace or regenerate the cells once having reached a resistance of 200 Pa. Clean by shaking (in case of rough and dry dust) or by counter current air or by warm water and cleaning agent, then, if necessary, grease again the filter with adhesive oil. |
| The table below shows the capacities and the initial resistance for the standard sizes. |
|
Dimensions
(mm)
|
-
|
Capacity
(m³/h)
|
Initial
resistance (Pa)
|
-
|
Capacity
(m³/h)
|
Initial
resistance (Pa)
|
||
|
thick
23 mm
|
thick
48 mm
|
thick
23 mm
|
thick
48 mm
|
|||||
|
400
x 500
|
630
|
15
|
25
|
950
|
25
|
40
|
||
|
400
x 625
|
800
|
1200
|
||||||
|
500
x 500
|
800
|
1200
|
||||||
|
500
x 625
|
1010
|
1520
|
||||||
|
595
x 595
|
1140
|
1710
|
||||||
|
287
x 595
|
520
|
780
|
||||||
| The limit working temperature is of approx. 90°C. The CM filtering cells can be supplied with different dimensions and thickness from the standard above ones, with zinc-plated mattresses (CM/ZN type), entirely in aluminum (CMA type), in knitted AISI 304 stainless steel wires (CXC type) or AISI stainless steel expanded (strained) layers (CXR). |
| Telephone | +32-3-711.03.57 or +32-3-710.65.50 |
| Fax | +32-3-711.03.58 or +32-3-710.65.58 |
| Address | Winninglaan 17, B-9140 Temse (Belgium) |
| info@filtermat.be | |
| Website | www.filtermat.be |
|
|
|