Single cartridge
HCR / HCD series
 

The single cartridge HC series filter housings are the logical scale up of the SC series; they can therefore handle liquid or gas flow rates definitely greater with reduced installation costs due to the housing head being manufactured by precision micro casting.
The single cartridge HC series filter housings are integrally manufactured in AISI 316L stainless steel to be chemically compatible with most fluids.

They are suitable to install one filter cartridge in DOE, M6 or M7 arrangement, with lengths of 10", 20", 30" or 40".
The head closure is assured by a sturdy micro cast V-clamp quick opening system.
The threaded closure style DIN 11851 is available as an option to allow the use of the HCD series housings with hazardous liquids or gas.

ss single cartridge filter
   
CHARACTERISTICS
   
  • 100% AISI 316L construction
  • suitable for operating pressures up to 15 bar
  • V-clamp closure does not require special tools to open or close housing
  • heavy duty designed V-clamp closure as standard item
  • the optional DIN 11851 closure makes the housing suitable also for gas filtration
  • in line in/out connections for easy installation
  • O-ring head/bowl seal
  • head manufactured by lost wax micro casting system
  • suitable for cartridge length from 10" to 40"
  • installation of DOE cartridges independent from bowl, to allow use of both "soft" or "hard" cartridges
  • double O-ring positive seal with M6 or M7 fittings, eliminates risk of fluid by-pass especially when < 10µm cartridges are installed
  • designed to allow visual checking of the installed cartridge prior to bowl closure
  • accepts also pleated mesh cartridges with increased inside/outside diameter for higher flow rates
HCR series
HCD series
 
DIMENSIONAL DATA
Series
Dimensions (mm)
Volume
Connections
Weight
 
A
B(1)
liters
In/out
Drain
kg
HCR/HCD 10
150
380
4,0
1 1/2" Gas-f
1/4" Gas-f
5,0
HCR/HCD 20
150
650
6,0
1 1/2" Gas-f
1/4" Gas-f
6,5
HCR/HCD 30
150
900
8,6
1 1/2" Gas-f
1/4" Gas-f
8,5
HCR/HCD 40
150
1150
11,0
1 1/2" Gas-f
1/4" Gas-f
10,0
(1) For cartridges style M7 (option PO1), dimensions B must be increased by 50 mm
 
Differentiel pressure
 
PRODUCT SPECIFICATION
 
Max. operating pressure (PS)  
Series HCR 15 bar @ 100°C
Series HCD 10 bar @ 100°C
 
In the CE countries where the Directive 97/23/CE PED is applicable, for certain types the max. operating pressure must be reduced to remain in the application field of art. 3.3.
 
Fluid
PS x V
art. 3.3
Max. operating pressure
HCR series
Max. operating pressure
HCD series
Length
  
10"
20"
30"
40"
10"
20"
30"
40"
Liquids Gr. 2
<10000
15 bar
15 bar
15 bar
15 bar
10 bar
10 bar
10 bar
10 bar
Liquids Gr. 1
<200
15 bar
15 bar
15 bar
15 bar
10 bar
10 bar
10 bar
10 bar
Gas Gr. 2
<50
N/A
N/A
N/A
N/A
10 bar
8 bar
5,5 bar
4,5 bar
Gas Gr. 1
<25
N/A
N/A
N/A
N/A
6,0 bar
4,0 bar
2,8 bar
2,0 bar
 
The filters will not bear the the CE mark and a CE Declaration of Conformity will not be released in accordance with art. 3 par. 3 of the Directive 97/23/CE PED. For higher pressures and temperatures, please contact Filtermat. HCR series housings are NOT SUITABLE for gas filtration.
The use of filter housings at safe temperatures and pressures depend from the filter element and gasket installed, related to the processed fluids. In case of doubt, please contact Filtermat to verify the chemical compatibility.
       
Max. operating temperature
The maximum operating temperature depends from the material of the O-ring gasket installed in the head :
EPDM (standard) 120°C Buna-N 120°C
Silicone 230°C Viton 230°C
FEP or PTFE 260°C    
Construction materials
Head AISI 316L micro cast    
Bowl AISI 316L    
Closure V-clamp : AISI 316
Threaded closure DIN11851 : AISI 316L
Finishing
Standard Pickled internally/manually polished externally  
Optional completely electropolished  
Connections
Inlet/outlet 1 1/2 " GAS-f    
Drain 1/4" GAS-f    
Flanged connections ANSI, UNI, DIN, TriClover    
 
ORDERING CODE                  
                   
HC
R
10
S
S
-
01
N
-
B06
 
Series
length
Materials
  
In/out connections
  
Options
 
R = V-clamped micro cast
10 = 10"
S = SS 316L
  
01 = 1 1/2"
M = Gas-f
  
B01 = DOE
 
D = DIN 11851
20 = 20"
        
F = flanged (2)
  
P01 = M7 (2)
   
30 = 30"
        
T = TriClover (2)
  
...
   
40 = 40"
        
D = DIN 11851 (2)
    
                 
(2) Available only upon request

FILTERMAT YOUR RELIABLE PARTNER
Filtermat filters
Telephone +32-3-711.03.57 or +32-3-710.65.50
Fax +32-3-711.03.58 or +32-3-710.65.58
Address Winninglaan 17, B-9140 Temse (Belgium)
Email info@filtermat.be
Website www.filtermat.be