FiltaPleat High Surface Area Cartridges utilizes pleated depth media offering maximum efficiency and exceptionally high flow capabilities. Developed to suit industrial processes where high performance is required, the low pressure loss and high dirt capacity makes it the ideal choice for fine polishing applications. In-house developments have epitomized the pleat pack ensuring rigidity is maintained at all flow rates.

Two media options are offered as standard, the PP and GP. The PP features the specific CRY Cryptosporidium grade designed for Food and Beverage applications. All grades have all polypropylene end caps and internal support core. Thermal welding processes seal all components, eliminating adhesives and extractables and epitomizing cartridge integrity.

FiltaPleat -PP cartridges feature
• Melt blown Polypropylene media
• Wide chemical compatibility
• Materials meet US FDA title 21 requirements
• CRY Cryptosporidium grade

FiltaPleat -GP cartridges feature
• Glass microfibre media
• Extremely high dirt holding capacity

Absolute Rated Filter Media
• Available from 0.5 to 90 µm
• Consistent reliable performance

Product Features

FiltaPleat filter cartridges are produced using an improved manufacturing process resulting in the following features:
• High surface area, resulting in low clean delta-P and excellent dirt holding capacity
• 100% thermally welded construction for maximum integrity and strength, upto 1541mm (60”)
• Internal support core for resistance to back pressure

Filtermat manufacture a comprehensive range of filter housings for the FiltaPleat cartridges.
Available in many materials and sizes to suit all flow rates, please consult our sales office for further details on our full range.

• Absolute removal ratings for consistent and reliable performance
• PP– Wide chemical compatibility using materials that meet FDA requirements
• GP– Glass microfibre media gives excellent dirt holding capacity
• Pleat geometry specifically designed for in-to-out flow direction
• Batch traceability
• Low maintenance – fewer number of cartridges
• Cryptosporidium grade (CRY) with typical 104 log reduction value for use in Food and Beverage applications

- outside diameter 160 mm  
- core diameter 75 mm  
- typical surface area (per 40") 15PP : 8 to 10.3 m² / 15GP : 6.2 to 6.7 m²  
- length see ordering guide  
Maximum Operating Conditions    
- temperature 80°C  
Recommended max. differential pressure : 1,5 bar (*1)  
Max. delta-P
PP Media
GP Media
(*1) Filtermat recommend that FiltaPleat cartridges are changed at a differential pressure of 1.5 bar in normal service - the operating conditions above should be treated as maximum differential pressures for short term use without causing cartridge collapse problems.

Product validation guide available on request.
All FiltaPleat cartridges are manufactured under strict control with batch number identification, giving full traceability on all components.
Core / Assembly
Micron rating
AMKBP G = Glass microfibre P = Polypropylene CRY = Crypto 20 = 527 mm C = Flange B = Buna N  
  P = Polypropylene   00 = 0,5 µm 40 = 1038 mm   E = EPDM
  01 = 1.0 µm 60 = 1541 mm F = FEP/Silicone
02 = 2.0 µm   S = Silicone
03 = 3.0 µm V = Viton
04 = 4.5 µm  
05 = 5.0 µm
06 = 6.0 µm
10 = 10 µm
20 = 20 µm
40 = 40 µm
50 = 50 µm (*2)
70 = 70 µm (*2)
90 = 90 µm (*2)
Example : AMKBPPP0520CE = Polypropylene media and core, 5µm rating, single length 527 mm (20"), C flange connection with EPDM seal
(*2) Polypropylene media only
Food and beverage bottled water, beers, wines, polishing lines, general clarification
Pharmaceutical solvent discharge, raw water supplies, batch transfers
Fine chemicals polymers, acids, bases, solvents
Water treatment pre reverse osmosis, UV protection, resin trap
Automotive wash solutions, cooling fluid, blanking wash oils, eletcrophoretic paints
Oil & Gases water injection systems, amine streams, glycol
Power generation water treatment (boiler feed sweetening), return condensate line

Filtermat filters
Telephone +32-3-711.03.57 or +32-3-710.65.50
Fax +32-3-711.03.58 or +32-3-710.65.58
Address Winninglaan 17, B-9140 Temse (Belgium)